Instrument panel indicators – HONDA 2010 CR-V User Manual

Page 71

Advertising
background image

This indicator comes on with the
high beam headlights. For more
information, see page

.

This indicator comes on as a
reminder that you must refuel soon.

This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page

).

If this indicator comes on when you
turn the ignition switch to the ON
(II) position and release the parking
brake, it means there is a problem
with the DRL. There may also be a
problem with the high beam
headlights. Have your vehicle
checked by your dealer.

When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle flash.

When the indicator comes on, there
are about 2.3 U.S. gal (8.6 ) of fuel
remaining in the tank.

When the needle reaches E, there is
a very small amount of fuel in the
tank.

The appropriate indicator comes on
in this display if the tailgate or any
door is not closed tightly.

The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages

and

).

Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.

77

78

361

363

High Beam Indicator

Low Fuel Indicator

Daytime Running Lights
Indicator

Turn Signal and
Hazard Warning
Indicators

Door and Tailgate Open Indicator

Instrument Panel Indicators

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

65

09/07/16 17:55:36 31SWA630_070

Advertising
This manual is related to the following products: