HONDA 2010 CR-V - Manual (Page 180)

The SCAN function
samples all the tracks on the disc in
the order they are recorded on the
disc (all files in the selected folder in
MP3 or WMA mode). To activate the
scan feature, press and release the
SCAN button. You will see ‘‘SCAN’’
in the display. You will get a 10
second sampling of each track/file in
the disc/folder. Press and hold the
SCAN button to get out of scan
mode and play the last track sampled. This feature,
when activated, samples the first file
in each folder on the disc in the
order they are recorded. To activate
the folder scan feature, press the
SCAN button repeatedly. You will
see ‘‘F-SCAN’’ in the display. The
system will then play the first file in
the main folders for about 10
seconds. When it plays a file that you
want to continue listening to, press
and hold the SCAN button. When
the system samples the first file of
all folders, F-SCAN is canceled, and
the system plays normally.
Each time you press and release the
SCAN button, the mode changes
from file scan, folder scan, disc scan,
then to normal play.
This function
samples the first track of each disc
in the in-dash disc changer in the
order they are stored. To activate
disc scan, press the SCAN button
repeatedly until you see D-SCAN in
the display. The system will then
play the first track/file of the first
disc for approximately 10 seconds.
After playing the first track/file of
the last disc, the system plays
normally.
In MP3 or WMA mode SCAN
FOLDER-SCAN
DISC-SCAN
Playing Discs (EX and EX-L models without navigation system)
174
09/07/16 18:14:41 31SWA630_179