HONDA 2010 CR-V - Manual (Page 369)

Determine which of the four bulbs
is burned out: stop/taillight, back-
up light, turn signal, or side
marker.
Remove the socket by turning it
one-quarter turn counterclockwise.
Use a Phillips-head screwdriver to
remove the taillight assembly
mounting screw under each cover.
Pull the taillight assembly out of
the rear pillar.
Open the tailgate. Place a cloth on
the edge of the cover to prevent
scratches. Remove the covers by
carefully prying on the edge with a
small flat-tip screwdriver. 2.
3.
4.
5.
1.
CONTINUED
Replacing Rear Bulbs
Lights
Ma
int
e
na
nce
363
BULBS COVER
SCREWS
BULBS
09/07/29 20:55:12 31SWA630_368