HONDA 2011 Fit - Manual (Page 273)

Replacing a Fog Light Bulb
On Sport model
The fog lights use halogen bulbs.
When replacing a bulb, handle it
carefully. See page 264 for more
information.
1. Use a Phillips-head screwdriver to
remove the screw.
2. To remove the fog light assembly,
pull it out of the bumper.
3. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
4. Remove the bulb by turning it
about one-quarter turn
counterclockwise.
5. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the fog lights to test the
new bulb.
8. Reinstall the fog light assembly,
then tighten the screw.
SCREW
ELECTRICAL CONNECTOR
CONTINUED
Lights
267
Maintenance
10/08/06 13:54:35 11 FIT MMC North America Owner's Manual 50 31TK6620 enu