HONDA 2011 Fit - Manual (Page 91)

3. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
4. Release the switch, and within 20
seconds, turn the ignition switch to
the LOCK (0) position.
To program the Drive Lock mode:
Locks all doors and tailgate when the
vehicle's speed reaches about 9 mph (15
km/h).
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. On A/T vehicles, push and hold the
brake pedal, and move the shift
lever out of the Park (P) position.
4. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch, and within 20
seconds, turn the ignition switch to
the ACCESSORY (I) position.
On
A/T vehicles, move the shift lever to
the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
A/T models
Door Locks
85
Instruments
and
Controls
10/08/06 13:54:35 11 FIT MMC North America Owner's Manual 50 31TK6620 enu