HONDA 2011 Fit - Manual (Page 298)

Installing a wheel cover
All models except Sport and Canadian
LX model with manual transmission
1. Make sure the wire support ring is
hooked into the clips around the
edge of the wheel cover.
2. Align the valve mark on the wheel
cover to the tire valve on the
wheel, then install the wheel
cover.
3. Make sure the wire support ring is
on the outer side of the tire valve
as shown.
CLIPS CLIPS
WIRE SUPPORT RING
Changing a Flat Tire
292
10/08/06 13:54:35 11 FIT MMC North America Owner's Manual 50 31TK6620 enu