Temporarily repairing a flat tire – HONDA 2011 Fit User Manual

Page 304

Advertising
background image

19. Drive carefully within the speed of

50 mph (80 km/h) for 5 minutes.

20. Stop safely and check the pressure

in the tire. Remove the tire valve
cap, screw the air pump hose onto
the tire valve, and check the air
gauge. (You do not need to attach
the power cord or turn the air
pump switch on.)

If pressure is less than 19 psi (130
kPa), do not drive the vehicle
further or attempt to re-inflate the
tire. Call or wait for help. If
pressure is lower than 33 psi (230
kPa) and higher than 19 psi (130
kPa), use air pump to bring tire
pressure to 33 psi (230 kPa).

21. Then, drive carefully within the

speed of 50 mph (80 km/h) for 5
minutes more.

22. Stop safely and check the pressure

in the tire.

VALVE CAP

TIRE VALVE

AIR PUMP HOSE

Temporarily Repairing a Flat Tire

298

10/08/06 13:54:35 11 FIT MMC North America Owner's Manual 50 31TK6620 enu

Advertising
This manual is related to the following products: