P217), High-mount brake light bulb, Rear license plate light bulb – HONDA 2013 Fit User Manual
Page 218
Advertising
217
uu
Replacing Light Bulbs
u
High-Mount Brake Light Bulb
Main
tenan
ce
High-Mount Brake Light Bulb
High-mount brake light bulb is a LED type. Have an authorized Honda dealer inspect
and replace the light bulb.
Rear License Plate Light Bulb
When replacing, use the following bulb.
1. Push the lens on the left and pull out the
lens and the socket attached to it.
2. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
3. Remove the old bulb and insert a new bulb.
Rear License Plate Light: 5 W
Lens
Bulb
2013 Fit
TOC
Home
QRG
Index
Advertising
This manual is related to the following products: