Towing hook – HONDA 2013 Fit User Manual

Page 266

Advertising
background image

Continued

265

uu

Emergency Towing

u

Han

d

lin
g the U

n

expected

For very short distances, such as freeing the vehicle, you can use the detachable
towing hook that mounts on the anchors in the front and rear bumpers.

1. Put cloth on the edge of the cover.

Carefully pry with a small flat-tip
screwdriver or a metal fingernail file to
remove the cover.

2. Take the towing hook and the jack handle

bar out of the tool bag in the cargo area.

3. Screw the towing hook into the hole, and

tighten it with the jack handle bar.

Towing Hook

1

Towing Hook

NOTICE

To avoid damage to your vehicle, use the towing
hook for straight, flat ground towing only. Do not
tow at an angle. This hook should not be used to tow
the vehicle onto a flat bed. Do not use it as a tie
down.

Make sure to use the properly-designed and attached
towing equipment.

NOTICE

Do not slip the clutch for a long time to get unstuck.
This may overheat and damage the transmission.

Cover

Towing Hook

Jack Handle Bar

2013 Fit

TOC

Home

QRG

Index

Advertising
This manual is related to the following products: