HONDA 2013 Fit - Manual (Page 247)

uu If a Tire Goes Flat u Temporarily Repairing a Flat Tire
246
Han
d
lin
g the U
n
expected
1. Pull up the strap and open the cargo area
floor lid.
2. Take the kit out of the case.
u Place the kit on flat ground near the flat
tire, away from traffic.
3. Remove the valve cap from the tire valve
stem.
4. Shake the sealant bottle.
5. Attach the sealant/air hose onto the tire
valve stem. Screw it until it is tight.
u Make sure the bottle remains upright to
ensure all of the sealant flows into the
tire.
■ Injecting Sealant and Air 1 Injecting Sealant and Air
When making a temporary repair, carefully read the
handling manual provided with the kit.
In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.
The sealant is latex based and can permanently stain
clothing and other materials. Be careful during
handling and wipe up any spills immediately.
Floor Lid
Tire Repair Kit Strap
Tire Valve Stem
Valve Cap
Tire Valve Stem
Sealant/air hose
2013 Fit
TOC
Home
QRG
Index