2013 fit – HONDA 2013 Fit User Manual
Page 67
66
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Transmission
Indicator
*
●
Comes on for a few seconds when you
turn the ignition switch to ON
(
w
, then
goes off.
●
Blinks if the transmission system has a
problem.
●
Blinks while driving - Avoid sudden starts and
acceleration and have the vehicle checked by a
dealer immediately.
M (sequential shift
mode) Indicator/
Gear Position
Indicator
*
●
Comes on when the manual sequential
shift mode is applied.
●
Blinks if the transmission system has a
problem.
2 Sequential Shift Mode P. 169
Seat Belt Reminder
Indicator
●
Comes on and the beeper sounds if you
are not wearing a seat belt when you
turn the ignition switch to ON
(
w
.
●
If the front passenger is not wearing a
seat belt, the indicator comes on a few
seconds later.
●
Blinks while driving if either you or the
front passenger has not fastened a seat
belt. The beeper sounds and the
indicator blinks at regular intervals.
●
The beeper stops and the indicator goes off when
you and the front passenger fasten their seat belts.
●
Stays on after you or the front passenger has
fastened the seat belt - A detection error may
have occurred in the sensor. Have the vehicle
checked by a dealer.
Low Fuel Indicator
●
Comes on when the fuel reserve is
running low (approximately 1.64 U.S.
gal./6.2 Liter left).
●
Blinks if there is a problem with the fuel
gauge.
●
Comes on - Refuel your vehicle as soon as possible.
●
Blinks - Have the vehicle checked by a dealer.
*
Not available on all models
TOC
Home
QRG
Index
2013 Fit