HONDA 2011 Civic Sedan - Manual (Page 157)

Each preset button’s frequency is
shown on the bottom of the audio
display. If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
press the SCAN button again.
Each preset button can
store one frequency on AM and two
frequencies on FM.
The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press and hold the
or side of
the TUNE bar until you hear a beep,
then release it.
The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station for about 10 seconds.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
1.
2.
3.
4.
CONTINUED
Preset
SEEK
SCAN
Audio System (Models with navigation system)
Fe
a
tu
re
s
151
10/06/23 14:14:19 31SNA650_156