Turn signals and headlights – HONDA 2011 Civic Sedan User Manual

Page 79

Advertising
background image

Turn Signal
OFF
Parking and interior lights
Headlights on
High Beams
Flash high beams

When the light switch is in the
‘‘

’’ or ‘‘

’’ position, the

lights on indicator comes on as a
reminder.

To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.

Turning the switch to the ‘‘

’’

position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime when
you open the driver’s door.

Push down on the

lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.

Push the lever

forward until you hear a click. The
high beam indicator will come on
(see page

). Pull the lever back to

return to the low beams.

Turning the

switch to the ‘‘

’’ position turns

on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.

1.
2.
3.
4.
5.
6.

61

Turn Signal

High Beams

Headlights On

Turn Signals and Headlights

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

73

10/06/23 14:01:21 31SNA650_078

Advertising
This manual is related to the following products: