HONDA 2010 Accord Crosstour - Manual (Page 352)

CONTINUED
Open the tailgate. Place a cloth on
the edge of the cover to prevent
scratches. Remove the covers by
carefully prying on the edge with a
small flat-tip screwdriver.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the inner fender cover in place.
Install the holding clip. Lock it in
place by pushing on the center.
Tighten the screw securely.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
5.
6.
7.
1.
3.
4.
Replacing Rear Bulbs
Lights
Ma
int
e
na
nce
349
SOCKET
COVER
BULB
09/09/30 14:36:59 31TP6600_354
2010 Accord Crosstour