HONDA 2010 Accord Crosstour - Manual (Page 386)

Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short. If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Start the vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Connect the second jumper cable
to the negative (
) terminal on
the booster battery. Connect the
other end to the engine hanger as
shown. Do not connect this jumper
cable to any other part of the
engine.
7.
6.
5.
4.
Jump Starting
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
383
09/09/29 17:57:23 31TP6600_388
2010 Accord Crosstour