HONDA 2010 Accord Crosstour - Manual (Page 86)

Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Make sure the shift lever is in the
Park (P) position.
Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.
Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Release the switch, and within 20
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
Turn the ignition switch to the
LOCK (0) position. 1.
2.
3.
4.
5.
6.
3.
4.
Locks all doors and tailgate when the
vehicle’s speed reaches about 9 mph
(15 km/h).
To program the Drive Lock mode:
Door Locks
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
83
09/09/29 17:06:11 31TP6600_088
2010 Accord Crosstour