HONDA 2011 Accord Sedan User Manual
Page 105
To select a memorized position, do
this:
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your vehicle’s battery goes
dead or is disconnected.
To cancel the storing procedure
after pressing the SET button, do
any of the following:
Press the SET button again within
5 seconds.
Fail to press a memory button
within 5 seconds.
Readjust the seat position.
Make sure the parking brake is set
and the shift lever is in Park
(automatic).
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
1.
2.
Selecting a Memorized Position
Driving Position Memory System
102
MEMORY BUTTONS
10/06/18 15:55:33 31TA5630_107
2011 Accord Sedan