HONDA 2011 Accord Sedan - Manual (Page 106)

To stop the system’s automatic
adjustment, do any of these actions:
Push any of the adjustment
switches for the seat.
The system will move the driver’s
seat to the memorized position. The
indicator in the selected memory
button will flash during movement.
When the adjustment is complete,
you will hear two beeps, and the
indicator will stay on.
Press any button on the driver’s
door: SET, memory button 1 or 2.
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete. Release the parking brake
(manual).
Shift out of Park (automatic).
If desired, you can use the
adjustment switches to change the
seat position after it is in its
memorized position. If you change
the memorized position, the
indicator in the memory button will
go out. To keep this seat position for
later use, you must store it in the
driver’s seat position memory.
On vehicles with manual transmission
Driving Position Memory System
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
103
10/06/18 15:55:40 31TA5630_108
2011 Accord Sedan