HONDA 2011 Accord Sedan - Manual (Page 349)

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the
information display the next time
you turn the ignition switch to the
ON (II) position.
If maintenance service is done by
someone other than your dealer,
reset the Maintenance Minders
Turn the ignition switch to the ON
(II) position.
Press the select/reset knob
repeatedly until the engine oil life
indicator is displayed.
All maintenance items displayed on
the information display are in code.
For an explanation of these
maintenance codes, see page
.
To change the information display
from the engine oil life display to the
odometer or the trip meter, press
and release the select/reset knob.
Immediately have the service
performed, and make sure to reset
the display as described as follows.
When the engine oil life is 0 percent
or negative distance traveled, the
Maintenance Minder indicator
(
) remains on even if you
change the information display.
1.
2.
349
Maintenance Minder
Resetting the Engine Oil Lif e
Display Maintenance Main Items and Sub
Items
346
MAINTENANCE
MINDER INDICATOR MAINTENANCE
MAIN ITEM
U.S. model is shown.
MAINTENANCE SUB ITEM(S)
TM
10/06/18 16:27:08 31TA5630_351
as follows:
2011 Accord Sedan