HONDA 2011 Accord Sedan - Manual (Page 142)

If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described. Each preset button can
store one frequency on AM and two
frequencies on FM.
Press the A. SEL button. You will see
A. SEL flashing in the display, and
the system goes into scan mode for
several seconds. It stores the
frequencies of six AM, and twelve
FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
, press the
A. SEL (auto select) button.
For information on FM/AM radio
frequencies and reception, see
.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, skip, scan, or RDS
function to tune the radio to a
desired station.
Pick a preset button (1 6), and
hold it until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
1.
2.
3.
4.
To turn off auto select
Preset AUTO SELECT
Playing the FM/AM Radio (LX, LX-P, and U.S. SE models)
Fe
a
tu
re
s
139
10/06/18 16:00:26 31TA5630_144
page 248
originally set.
This restores the presets you
2011 Accord Sedan