JVC KW-NT1 - Manual (Page 69)

ENGLISH
67
Initial: Underlined
Menu items Selectable settings
System
Language * 5 Select the language used for on-screen information and voice guidance.
English, Español, Français, Deutsch, Italiano, Nederlands, Dansk,
Svenska, Português, Ceština, Suomi, Norsk, Polski, Türkçe,
Eλληνικα, Magyar
Time Format Select either 12-hour system or 24-hour system.
12 Hours, 24 Hours
Local Time Adjust Select <Auto> to set your time zone for clock adjustment.
Auto, Manual
• When selecting <Manual>, set your time zone through <Time
Zone> and <Summer time>.
• When the time zone is not adjusted correctly by selecting <Auto>,
change the setting to <Manual> and set your time zone manually.
Time Zone * 5 Select your residential area from one of the following time zones for
clock adjustment.
UTC, UTC+01:00, UTC+02:00
Summer time* 5 Activate this if your residential area is subject to summer time.
Auto : Activates summer time.
Off : Cancels.
Beep On: Activates the key-touch tone.
Off: Cancels.
Startup Message * 6 Edit the voice message at startup/shutdown of the System.
• To edit the message, press [Edit], enter the message, then press
[OK].* 7 You can listen to the edited message by pressing [Test].
Shutdown Message * 6
Reverse Signal Polarity * 5 Battery, GND (
☞ page 7)
Restore Factory Default Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation
setting screen (
☞ page 7).
* 5 The setting varies depending on the installation settings (
☞page 7).
* 6 The languages available for the message are: English, Spanish, French, German, Italian, Dutch, Portuguese, Danish
and Swedish.
* 7 For entering the characters,
☞ page 12.
EN_KW-NT1[E]3.indb 67 EN_KW-NT1[E]3.indb 67 09.5.29 1:15:11 PM 09.5.29 1:15:11 PM