English – JVC KW-NT1 User Manual

Page 86

Advertising
background image

ENGLISH

84

Symptoms

Remedies/Causes

Navigation

Navigation voice cannot be heard from the
speakers.

Guidance volume level is set to the minimum level. Adjust
it to the optimum level. (

☞ page 36)

The voice guidance does not come out from the
speaker on the driver’s side.

Change the <Output> setting. (

☞ page 41)

Navigation guidance is sometimes incorrect.

Reversing signal/speed signal leads are not connected.
Connect them correctly (

☞Installation/Connection

Manual—separate volume).

A POI found using <POI Name> in the
<Destination Menu> is not within the
selected city.

This is not a malfunction. The System may also search
areas around the selected city.

The current position displayed on the map
remains wrong for more than 30 minutes.

Check the connection of the following leads.
– GPS aerial
– Speed signal lead
If any disconnection is found, connect the lead again.
• If no problems are found with connections, reset the

calibration data by selecting <Reset Calibration
Data
>. (

☞ page 40)

The distance and estimated time in the
guidance are inaccurate after replacing/
rotating the tyres.

Perform <Reset Calibration Data> to clear the
accumulated calibration data. (

☞ page 40)

“Check GPS Aerial”

Check the connection of the GPS aerial.

“Acquiring GPS Signal”

• Acquiring GPS signals. Wait until signal reception is

completed.

• GPS signals cannot be received. Move to the place where

the System receives the GPS signals.

“Route calculation failed.”

Failed to calculate the route. The destination/via point is
too far from any road. Select another destination/via point
where is close to a road.

“Route calculation is aborted because
destination is too far.”

The destination/via point is too far from the current
position. Select another destination/via point where is
nearer to the current position.

“Specified destination is not found.”

Valid information is not found in the database. Search for
another place. Press [

] and search again with

different conditions (such as different category or place).

Troubleshooting

EN_KW-NT1[E]3.indb 84

EN_KW-NT1[E]3.indb 84

09.5.29 1:15:33 PM

09.5.29 1:15:33 PM

Advertising