Candy GO W485D-66 - Manual (Page 46)

46
L
EN
DRYING PROGRAMME SELECTION BUTTON
With the programme selector not in the OFF position, press the
button to select the required drying programme; an indicator
will light to display the drying result selected each time you
press the button.
To cancel the selection before the start of a drying programme,
press the button repeatedly until the indicators go out or return
the programme selector to the OFF position.
To cancel the cycle during the drying phase, hold the button
down for 2 seconds until the cooling indicator lights up; given
the high temperature inside the drum, we recommend that you
allow the dryer to complete the cool down period before
returning the programme selector to the OFF position and
removing the laundry.
NOTE:
Do not dry unwashed items in the washer dryer.
Items that have been soiled with substances such as cooking
oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine,
waxes and wax removers should be washed in hot water with
an extra amount of detergent before being dried in the washer
dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes or
pillows fitted with foam rubber pads should not be dried in the
washer dryer.
Fabric softeners, or similar products, should be used as specified
by the fabric softener instructions.
The final part of a washer dryer cycle occurs without heat (cool
down cycle) to ensure that the items are left at a temperature
that ensures that the items will not be damaged.
WARNING:
Never stop a washer dryer before the end of the drying cycle
unless all items are quickly removed and spread out so that the
heat is dissipated.