Candy GO W485D-66 User Manual

Page 49

Advertising
background image

49

EN

6)Kg DETECTOR Indicator
Available on Cotton and Synthetic cycles, during the first 4
minutes of the cycle the intelligent sensor will weigh the
laundry and adjust the cycle time, water and electricity
consumption accordingly.

7) DEGREE OF SOILING
When a programme is selected the relevant indicator will
light up to show the minimum possible degree of soiling.
Selecting a greater degree of soiling using the special
button will cause the corresponding indicator to light up.

8) DRYING PROGRAMME INDICATORS

The indicators display the type of the drying programme:
Automatic Programmes: By selecting one of these 3
automatic programmes, the washer-dryer will calculate the
time needed for drying and the residual dampness
required, according to the load and drying type selected.
After pressing the START button, the display will shown the
drying time remaining.

The appliance calculates the time to the end of the

selected programme based

upon a standard loading, during the cycle, the appliance

corrects the time to that applicable to the

size and composition of the load.

= Extra dry drying programme (recommended

for towels, bathrobes and bulky loads)

= Cupboard dry drying programme

= Iron dry drying programme

USEFUL TIPS:

The 30 minute drying programme is recommended for small
loads (less than 1 kg) or slightly damp loads.
Your washer-dryer ends the cycle automatically when it
reaches the drying level selected.
For the correct operation of the appliance, it is preferable
not to interrupt the drying phase unless it is really necessary.

Timed programmes:
120 minutes – 90 minutes – 60 minutes – 30 minutes:
They may be used to select timed drying programmes.

Cool down phase

:

Switched on during the final cool down period, in the last 10
minutes of each drying phase.

6

}

7

{

8

Advertising