The gas burner – Candy PSA 640__1 FGH User Manual

Page 13

Advertising
background image

3 2

Each burner is contolled by a tap with progressive settings allowing :
* a wider choice of settings from the maximum position to the lowest and most precise one,
* easier flame regulation according to the pan diameter,
* no risk of cutting off the flame or switching off when the flame is turned down quickly.

Each burner is fitted with automatic ignition. The ignition can be made with one hand, while
you have the pan in the other hand.

USE :

• Turn on the gas tap,

A symbol next to each control knob indicated which burner is ignited.

Hob with automatic ignition integrated on the knob :

• Press and turn the knob until position

"High flame"

keeping it pressed to produce

sparks which in turn ignite the burner.

Hob

with safety device

on the burner and automatic ignition integrated on the

knob :

The thermocouple fast safety is a device allowing the automatic cut-out of the gas
supplying on the burner, in case the flame dies out accidentally.

• Press and turn the knob until position

"High flame"

keeping it pressed to produce

sparks which in turn ignite the burner. Keep the pression on the control knob a few
seconds to permit the releasing of the safety device.

• Set the flame according to your cooking requirements.
Intermediate positions are available between the

"High flame"

and

"Low flame"

settings on the control knob.

• To turn the flame out, turn the control knob back to stop position.

Please note :

. if there is a power cut, the burner can be ignited by pressing in and turning the knob

to position

"High flame

"

and holding a naked flame to the burner.

THE GAS BURNER

Advertising