Candy PSA 640__1 FGH - Manual (Page 5)

2 4
• CHANGING GAS TYPE : the calorific power output and gas pressure will vary
according to the gas supply. Burner setting must be carried out once the gas and electrical
installation is complete.
When changing gas type, you must successively :
. fit the correct jets,
. adjust the appearance of the flame by regulating the air ring.
. adjust the minimum flame of the taps (see page 30).
• CHANGING THE JETS :
Each jet is designed by a size. A special spanner supplied with the appliance is designed to
hold the jets securely during the set up operation.
To gain access to these jets :
. remove the pan support,
. remove the burner cap and body,
. using the spanner supplied with the appliance, unscrew
the jet,
. refit the correct jet for the type of gas to be used,
. screw it or them fully,
. replace the burner body, cap and the pan support.
INSTALLATION: " G A S C O N N E C T I O N "
Jet
Burner
body
Example : Fast or Double ring gas burner 3,2 kW