Accu-Chek Aviva Plus silver - Manual (Page 31)

29
Inserting.a.Lancet.Drum
You.must.first.load.the.drum.into.the.lancing.device.to.get.it.ready.for.use.
1. Remove the cap by
pulling it straight off. It
is not a twist cap. The
easiest way to do this
is to place your thumb
to the side of the
notch as seen in the
illustration.
2. Before you insert a
drum, be sure that the
release button is not
yellow, and that no
lancets are sticking
out of the drum. Insert
a new drum, blue ring
first, until it stops. It
clicks into place.
3. Slide the cap on until
it stops by aligning
the notch on the cap
with the notch on the
device.
4. You are now ready to
use the first lancet.
The lancet counter on
the plunger shows a
number 6, meaning
you have 6 new
lancets remaining.
NOTE.
Once the drum is inserted into the lancing device, do not remove the drum until completely used. The drum
cannot be reinserted.