Preparing.the.lancing.device.for.fingertip.testing, Warning – Accu-Chek Aviva Plus silver User Manual
Page 32
Advertising
30
Preparing.the.Lancing.Device.for.Fingertip.Testing
1. Make sure the black cap is on
the lancing device. Do not use
the AST cap to perform a
fingertip test.
2. Adjust the depth by turning the
Comfort Dial. The depth
indicator shows the current
depth selection. The higher the
number, the deeper the
penetration. If you have soft
skin, we suggest starting at a
depth of 2. If your skin is
calloused or thick, try a higher
setting.
3. Press the plunger in as far as it
will go, like a pen. The release
button turns yellow. Do not
press the release button while
pressing the plunger.
4. Set the lancing device aside
until later in the test.
WARNING
Use.a.new.lancet.for.each.fingerstick.to.avoid.infection.
Advertising