Acnodes FES 7510 - Manual (Page 45)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FES7510
Fanless Embedded Controller comes with
Intel Celeron M ULV Processor
3-3. FLASH BIOS UPDATE
3-3-1. System BIOS Update:
Users of FES-7510 can use the program "Awdflash.exe" contained in the Utility Disk for system BIOS and
VGA BIOS update.
3-3-2. To update VGA BIOS for LCD Flat Panel Display:
As FES-7510 user, you have to update the VGA BIOS for your specific LCD flat panel you are going to
use. For doing this, you need two files. One is the "Awdflash.exe" file and the other is the VGA BIOS for ATI
Rage Mobility M6 file for LCD panel display. Both file must be provided by the vendor or manufac-
turer. When you get these two files ready, follow the following steps for updating your VGA BIOS:
1. Install "Awdflash.exe" from Utility Disk to Drive C.
2. Insert the VGA BIOS file you have obtained from the vendor.
Type the path to Awdflash.exe and execute the VGA BIOS update with file 7510xxxx.bin
3. C:\UTIL\AWDFLASH>AWDFLASH 7510xxxx.bin
4. The screen will display as the table fount on the next page:
If you want to save up the original BIOS, enter "Y" and press < Enter >.
If you choose "N", the following table will appear on screen.