Fes7510 – Acnodes FES 7510 User Manual
Page 73
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FES7510
Fanless Embedded Controller comes with
Intel Celeron M ULV Processor
This section covers technical items, which is strongly recommended for experienced users only.
1.
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data
(ESCD) when you exit Setup if you have installed a new add-on and the system configuration has caused
such a serious conflict that the operating system cannot boot.
2.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth and Plug and Play-compatible
devices. However, this capability means absolutely nothing unless you are using a Plug and Play operat-
ing system such as Windows 95. By choosing "manual", you are allowed to configure the IRQ
Resources and DMA Resources.
IRQ RESOURCES:
The options for these items are found in its sub menu. By pressing the
<ENTER> key, you are prompt to enter the sub menu of the detailed options as shown below: