Acnodes FES 7510 - Manual (Page 72)

© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
FES7510
Fanless Embedded Controller comes with
Intel Celeron M ULV Processor
4. Wake-Up by PCI card:
An input signal from PME on the PCI card awakens the system from a soft off state.
5. Power On by Ring:
This item allows you to wake up System by a MODEM device.
6. RESUME BY ALARM:
When Enabled, your can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode.
4-8. PNP/PCI CONFIGURATION
Choose “PNP/PCI CONFIGURATION” from the main menu, a display will be shown on screen as below:
PNP/PCI Configuration Setup Screen
The PNP/PCI Configuration Setup describes how to configure PCI bus system. PCI, also known as
Personal Computer Interconnect, is a system, which allows I/O devices to operate at speeds near-
ing the speed of the CPU itself uses when communicating with its own special components.