ACR&Artex Vecta3 - Manual (Page 20)

Y1-03-0235-1C 20
POWER DOWN
If the system is not interacted with for >59 minutes, the system
will automatically shut down to save battery charge. You will be
alerted visually as well as via beeps that the system is getting
ready to shut down. Press any key to abort the shut down
sequence and continue using the system.
PART THREE
– User Preferences and Settings
MENU SCREEN
When you press the menu key on the keypad, you will see this
screen. From this screen, all user programmable settings can
be accessed and modified.
Press the up arrow key or down arrow key on the Vecta™
3
keypad to select the function that you want to change.
To change volume, highlight VOLUME by using the up arrow
key or down arrow key.
Press the Select/Enter arrow key to indicate that you want to
change the volume. The VOLUME screen will appear (below).
NOTE: The volume may also be adjusted directly from the
keypad by using the up arrow key and the down arrow key
VOLUME SCREEN
When in the VOLUME screen, press the up arrow key or down
arrow key to adjust the volume up or down. The system will
mimic the volume level as you move up and down the scale.
Please note that you will hear beeps representing volume
changes but you will also hear static in the background at the
same time.
The filled-in green bars indicate the sound level setting. The
bars outlined in green indicate volume levels not enabled.
When you are satisfied with the setting change, press the
Select/Enter arrow key to indicate that you want the new setting
to be stored.
If you do not interact with the system 10 seconds, the system
will return to normal operational use. No changes are made.
Press the Menu key to go back one menu level.