ACR&Artex Vecta3 - Manual (Page 22)

Y1-03-0235-1C 22
Highlight BARS, using the up arrow key or down arrow key, if
you wish to view the entire range of real time data in a vertical
bar graph format.
Press the Select/Enter arrow key. The BARS screen will appear
(below).
Once the BARS mode is selected, the system enters the search
mode using BARS as the view of the data. The BARS view,
when selected, replaces the NUMBERS view.
This view provides a more visual indication of the radio signal
when monitoring. As the signal level increases, the bars fill in
with color.
Highlight NUMBERS, using the up arrow key or down arrow
key, if you wish to view real time data as a large number with a
horizontal bar at the top.
Press the Select/Enter arrow key. The NUMBERS screen will
appear (below).
Once the NUMBERS mode is selected, the system enters the
search mode using NUMBERS to display the beacon signal
level.
Highlight COLOR to change the to the preferred color format,
using the up arrow key or down arrow key.
Press the Select/Enter arrow key to indicate that you want to
change the color scheme of the screens. The DEFAULT/ HIGH
CONTRAST screen will appear (below).
Highlight DEFAULT, using the up arrow key or down arrow key,
if you wish to view the screens in color, i.e, blue, green and
white.
Press the Select/Enter arrow key. The DEFAULT color scheme
will appear (below).