ACR&Artex Vecta3 - Manual (Page 25)

Y1-03-0235-1C 25
PART FOUR
– User Interface Behaviors
Default settings
Vecta™
3
default settings include:

View: NUMBERS view

Volume: Mid-level

Receiver frequency: 121.5MHz

LCD color scheme: Blue, ACR-
treuse™, white

Backlighting: Off
User programmable settings retained Settings adjusted by the user that will be saved
when the system is powered down include:

Volume

LCD color scheme

Main search screen (either NUMBERS
or BARS)
User programmable settings not
retained Settings adjusted by the user that will not be
saved when the system is powered down
include:

Training mode/training frequency
selection

Backlighting on
Length of time to view Peak Reading A peak reading remains stationary for 30
seconds and then “fades away” over a period of
60 seconds in the BARS and MICRO screens. A
new peak reading then replaces the previous
peak reading.
Time- outs The system will time out in 10 seconds in the
user programmable settings screens, if you do
not interact with the system.
The system will time out in 10 minutes when in
MICRO view mode. It will return to the
NUMBERS or BARS view and reset the MICRO
display. If the signal strength reading remains
out of range, the system will time out in 2
minutes.
The WELCOME SCREEN times out in 3
seconds.
Also see Battery save mode, below
Length of time a screen can be
viewed A user programmable settings screen can be
viewed for 9+ seconds before a selection is
made.
User cancellation You may cancel something you are doing by
pushing the Menu key or by waiting 10 seconds
for the system to time out. The system will go
back to the current mode.