ACR&Artex Vecta3 - Manual (Page 23)

Y1-03-0235-1C 23
Once the DEFAULT view is selected, the system enters the
search mode using DEFAULT color scheme on all screens.
If you do not interact with the system 10 seconds, the system
will return to normal operational use. No changes are made.
Press the Menu key to go back one menu level.
Highlight HIGH CONTRAST, using the up arrow key or down
arrow key, if you wish to view the screens in black, grey and
white. Some users find this color scheme easiest to see in
bright outdoor conditions.
Press the Select/Enter arrow key. The HIGH CONTRAST color
scheme will appear (below).
Once the HIGH CONTRAST view is selected, the system
enters the search mode using HIGH CONTRAST color scheme
on all screens.
If you do not interact with the system 10 seconds, the system
will return to normal operational use. No changes are made.
Press the Menu key to go back one menu level.
BACKLIGHT SCREEN
To change the backlight status, highlight BACKLIGHT using the
up arrow key or down arrow key.
Press the Select/Enter arrow key to indicate that you want to
turn the backlight off or on. The next screen you see will reflect
the change (example below).
After you depress the Select/Enter arrow key from the
BACKLIGHT selection, the display will change to either on or
off.
If you do not interact with the system 10 seconds, the system
will return to normal operational use. No changes are made.
Press the Menu key to go back one menu level
DEFAULT SCREEN
To change all settings back to default, highlight DEFAULT
using the up arrow key or down arrow key.
If you do not interact with the system 10 seconds, the system
will return to normal operational use. No changes are made.
Press the Menu key to go back one menu level.
See PART FOUR below for default settings.