ACR&Artex Float-Free 406 Memory Capsule - Manual (Page 14)

10 Y1-03-0202 Rev. E
5.8. IP Address and Subnet Mask
Setting a New IP Address and Subnet Mask
To change the IP address or subnet mask, click menu item ‘File’ then
click ‘Configure Capsule IP Address and Subnet Mask’ to open the
following dialog window.
Change the IP address and/or subnet mask and click the ‘Save’ button.
The IP address and subnet mask displayed in the lower right corner of
the demo software screen will display the new values. Cycle the
power to the RLB-35MC Memory Board for the new values to take
effect.