ACR&Artex Float-Free 406 Memory Capsule - Manual (Page 35)

31 Y1-03-0202 Rev. E
13.6. Setting a New IP Address and Subnet Mask Example
Send Set IP Address &
Subnet Mask request
to RLB-35MC
Start
Command echoed
back?
Setting IP Address &
Subnet Mask Failed
Close socket
connection
End
No
Yes
Open socket
Connection on Port
7200
Set IP Address & Subnet Mask.
AC,53,CA,35,49,50,C0,A8,02,4B,FF,FF,FF,00,00,00
Set IP Address & Subnet Mask request is on port 7200
Setting IP Address &
Subnet Mask was
Successful
The above example is for an IP Address of 192.168.2.75
and a Subnet Mask of 255.255.255.0.
Note that this is the ‘Configure Capsule IP Address and Subnet Mask’ option
in our demo software. To make the new settings take effect, cycle power to
the RLB-35MC capsule.