Acroprint HandPunch 1000 - Manual (Page 21)

Erasing the Memory
There are two options when erasing the memory of the HandPunch.
1. Setup
2. All
The erasing of the setup will set the HandPunch’s address, passwords, etc. back to
factory defaults.
Choosing the All option will take the HandPunch’s setup back to factory defaults plus
erase all user databases and datalogs. This action can not be undone. If there is a
software that is managing the system then the users can be downloaded back to the
HandPunch if needed.
The erase memory function allows a HandPunch’s setup and/or user database to be
erased.
Perform the following steps to erase the setup programs but retain the user database.
1. With system power OFF, depress reset switch.
2. Turn system power ON and wait 5 seconds.
3. LCD screen will display
ERASE :1 SETUP
:9 ALL!!!
Erasing
HandPunch
Memory