Activeforever Spa2Go Portable Spa (Blue) - Manual (Page 6)

NO HEAT PROBLEMS
1. With GFCI plugged into wall outlet, is topside
LED displaying any Temperature Number. If
YES, OK GREAT, there is Power going to the
unit. Next, lower the temperature down to 90
degrees and let unit run for about 10 minutes.
This gives the heating element a chance to cool
down. Now unplug the GFCI from the wall.
2. If NO, push TEST & RESET on GFCI, if still
no DISPLAY, Check Outlet with Lamp or Hair
Dryer to make sure outlet has power
Place all 3 caps back inside the spa
www.Activeforever.com