Actron CP9180 OBD II AutoScanner Plus - Manual (Page 31)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 5
Using The Scan Tool
3
Vehicle Power
When using the OBD II Cable, the power to
the Scan Tool comes from the vehicle DLC.
✓
Scan Tool will automatically turn on when
connected to vehicle.
System Setup
✓
System Setup allows:
❒
Display contrast to be changed.
❒
Scan Tool information to be viewed.
❒
Display to be checked.
❒
Operation of the keypad to be checked.
❒
Memory of the tool to be checked.
❒
Scan Tool to be upgraded.
✓
System Setup settings remain until internal battery becomes
discharged or is removed.
From Main Menu:
1.Select System Setup.
•Use
UP or DOWN arrow
key until System Setup is
highlighted.
•Press
ENTER.
Diagnostic
Connector
OBD II Function List
=====================
I/M Readiness
Read Codes
Pending Codes
Erase Codes
State OBD Check
View Data