Actron CP9180 OBD II AutoScanner Plus - Manual (Page 57)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 11
Vehicle Diagnostics
4
2. Select Yes to erase
diagnostic results and
codes.
•Press
UP
3. Prepare Vehicle.
•Turn key on.
•Leave engine off.
•Press
ENTER.
✓
If engine is running, tool may
display this screen. Codes cannot
be erased until the engine is off,
key is on.
4. Observe Command Sent message
is displayed.
•Press
ENTER.
5. Return to OBD II Function List.
•Press
ENTER .
Erase Codes
=====================
Are you sure you
want to Erase
Diagnostic Results
and Codes?
YES NO [
[
Erase
=====================
Engine is Running
Turn Engine Off
Turn Key On
Press ENTER
To Continue