Actron CP9180 OBD II AutoScanner Plus - Manual (Page 45)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 19
Using The Scan Tool
3
✓
When selected data does not exist in the Scan Tool’s memory, a
message informs the user to run the function.
3.Return to Select Print Data screen.
•Press
ENTER
.
Code Lookup
Code Lookup is used to look up definitions of DTCs stored in the Scan
Tool.
✓
The Scan Tool does not require power from the vehicle to perform this
function.
✓
Code Lookup is available from both the Main Menu and OBD II
Function List.
1. Select Code Lookup.
•Use
UP or DOWN arrow
key until Code Lookup is
highlighted.
•Press
ENTER
.
2.Select a Vehicle
•See Vehicle Selection for
details regarding this step
✓
This step is available only if a vehicle has not been selected since
the tool was powered up.
✓
Selecting a vehicle may provide the user with a manufacturer
definition when looking up manufacturer specific codes.
OBD II Function List
=====================

Record Data
Vehicle Information
Modules Present
Review Data
Print Data
Code Lookup
System Setup