Actron CP9180 OBD II AutoScanner Plus - Manual (Page 34)

Using The Scan Tool
3 – 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
4.Return to Setup Tool Menu.
•Use the
BACK key.
OR
•Use the
ENTER Key.
Display Test
The Display Test is used to check the display.
✓
The test fills every pixel of the display with a solid black character.
From System Setup menu:
1.Select Display Test.
•Use
UP or DOWN arrow
key until Display Test is
highlighted.
2. Start Display Test.
•Press
ENTER.
3. Look for Missing Spots.
• All characters display in solid black if
there are no concerns.
• Screen flips back and forth between
screens shown below.
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode