Install or replace batteries, Select degrees fahrenheit or celsius, Setup – AcuRite 00282 Thermometer User Manual

Page 4

Advertising
background image

4

SETUP

Install or Replace Batteries

AcuRite recommends high quality alkaline batteries for the best product

performance. Heavy duty or rechargeable batteries are not recommended.

Select Degrees Fahrenheit or Celsius

To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature

units, slide the “ºF/ºC” switch, located in the battery compartment of the

thermometer.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Remote Pager

1. Slide off the battery compartment

cover, located on the bottom of the

unit.

2. Insert 2 x AAA batteries into the

battery compartment. Follow the

polarity (+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Thermometer Display

1. Slide off the battery compartment

cover.

2. Insert 3 x AA batteries into the

battery compartment. Follow the

polarity (+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Advertising