AcuRite 00282 Thermometer - Manual (Page 8)

8
5. When 0:00:00 is reached, thermometer/pager (if in use) beeps/vibrates
until “SELECT” or “ ” is pressed.
Backlight
Press the Backlight button to momentarily illuminate the display for 5 seconds.
Press and HOLD Backlight button for 3 seconds to keep display illuminated.
Display will remain illuminated until button is pressed again or until
thermometer is powered OFF.
Remote Pager Setup
The Remote Pager can receive alerts from the thermometer when the Target
Temperature is reached or when the Timer reaches 0:00:00.
1. Press “
” button on the Remote Pager to power ON.
2. Pager emits an audible chirp and the Wireless Signal indicator (green)
flashes until a signal is established.
3. Wireless Signal indicator (green) remains lit when a good connection is
established and maintained, indicating that the pager is ready for use.
Remaining Cooking Time
1. When the Timer reaches 1:00 of remaining cooking time, a brief audio alert
will sound on the Remote Pager unit. If operating in Silent Mode, the unit will
vibrate briefly.
2. When the Timer reaches 0:00:00 or the target temperature is reached the
Battery indicator (red) and Signal indicator (green) will alternate flashing
and a continuous series of 3 .5 second audio alerts will sound on the
Remote Pager unit until the On/Off button is pressed. If operating in Silent
Mode, the unit will vibrate for .5 seconds 3 times and repeat until the On/
Off button is pressed.
Power the Unit ON/OFF
The thermometer will automatically power off after several minutes of inactivity. Press
“ ” to resume operation. To power off manually, press the “ ” button.
Warning Messages
When display reads “LO BAT”, replace
thermometer batteries.