ACU-RITE MILLPWR 3 Axes - Manual (Page 112)

PROGRAM STEPS
MILLPWR ®
Operation Manual 5-16
Frame
When you program a rectangular frame, you define it by its first corner, and its size
or diagonal corner.
To program a rectangular frame:
• Press the RECT key.
• Press the FRAME softkey.
• Enter the X- and Y-axes coordinates for the frame's 1 ST
Corner.
• In the “Size” field, enter the length of the frame along the
X- and Y-axes (unless you’re programming a 2
ND Corner).
• Enter the begin and end depths for the Z-axis.
• Enter either the number of passes OR the distance
between each pass. “Pass” refers to the cuts that are used
to machine the pocket to its “End” depth.
• Enter the Z-axis feed rate.
• (Optional) Enter a corner blend radius.