ACU-RITE MILLPWR 3 Axes - Manual (Page 79)

DEMONSTRATION
MILLPWR ®
Operation Manual 4-3
Consider
entering a Tool
Position. This
will enable you
to go to a loca-
tion away from
your workpiece
to change tools.
• Arrow down to SPINDLE .
• To use a forward spindle direction.
Press the
FORWARD softkey then
press the ENTER key.
• Set the cutter’s spindle speed for 1300 RPM.
• Press the USE key.
You don't have to press the ENTER key after the last
value—you can just press USE .