ACU-RITE MILLPWR 3 Axes - Manual (Page 159)

PROGRAM STEPS
MILLPWR ®
Operation Manual 5-63
Change Steps
The "Change Steps" feature gives you the ability to change or edit the depth, offset
and feed rate of several steps simultaneously.
Note: You can use this feature from anywhere within your program—you don't need
to highlight a specific step within the step range.
To use the “Change Steps” feature:
• From the PGM screen, press the STEP FUNCTIONS softkey.
• Press the CHANGE STEPS softkey.
• Enter the first and last step numbers that you would like to change in the “Step
Range” field.
• Highlight each field that you want to change and enter the new data.
• Press the USE key.
Note: It’s a beneficial to highlight the changed steps in the program sequence, then
press the
ENTER key. Each step should include the new settings.