ACU-RITE DRO 200M - Manual (Page 14)

DRO 200M Readout Operations
7
TOOL
DIA
. 2 5 ENTER
6
Setting Absolute Zero with a Tool
1.
Touch the tool to the edge of the workpiece.
2.
Make sure that the absolute position is displayed.
3.
Press the
ZERO
key for the appropriate axis.
4.
Enter the position of the tool center.
Setting Absolute Zero Using a Tool Offset
1.
Enter the tool’s diameter.
2.
Make sure that the absolute position is displayed.
3.
Identify the right edge of the tool.
4.
Touch the tool to the X=0 edge of the workpiece and press the ZERO key for
the appropriate axis.
You will have
better results
if you mill a
new edge.
ZERO
ABS
INCR
+/- . 2 5 ENTER 1
0.25
-.125
ZERO ZERO
Shortcut
ZERO ENTER
ABS
INCR