ACU-RITE DRO 200M - Manual (Page 2)

Readout Parameter Access Code
An access code must be entered before machine-related parameters can be set or
changed. This prevents inadvertent adjustments to the setup parameters.
IMPORTANT
The access code is 8891
Refer to the Setup section. Begin by pressing the
SETUP
key. When “SETUP” is
displayed, press the
8
,
8
,
9
,
1
, and
ENTER
keys. The readout is now
ready for machine parameter setting operations.
IMPORTANT
Supervisors may wish to remove this page from the Reference manual
after initially setting up the readout system. Retain in a safe place
for future use.